HOME : Back -> Pro Audio -> Amplifiers -> ATEN

ATEN 4 × 120W Power Amplifier with DSP

Product May Vary From Image
Our Price:
$3,395.50
Quantity: 
Part No:
575305
Brand:
Manuf No:
AP412-AT-U
 
AP412ATU
Usually Ships:
1-3 Days   More info

Ship Weight:
2 KG  Details
Product Description

AP412 is a 4-channel DSP-equipped amplifier that delivers 120W per channel and receives balanced / unbalanced mic / line-level signals to drive 4 / 8-ohm low impedance or 70 / 100V line loudspeaker systems. It also supports Lo-Z / Hi-Z in Bridge mode to deliver higher power.

Configurable via intuitive WebGUI / ATEN Audio Wizard, the built-in DSP allows Speaker EQ, 5-band EQ, compressor, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection. The ground-lift switch helps eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered without compromise on power efficiency with the Class D design. Customizable Auto Standby mode enables AP412 to automatically switch to sleep when the signal level falls lower than -40 / -50 dBu for 10 / 15 / 25 minutes.

With the system protection circuit, the amplifier is prevented from damages led by shorted outputs, over / under-voltage, high-frequency overload, and overtemperature. Plus, AP412 will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.

AP412 becomes compatible with Dante audio when working with AP901 expansion card or receives two more channels of mic / line signals with AP902 expansion card. It can be integrated with ATEN VK Control System via RS-232 / Ethernet for comprehensive control from a distance. The 1U casing is available for rack mounting. AP412 assures reliable amplification with professional audio quality and higher power delivery for larger commercial spaces.

Package Contents

  • 1x AP412 4 120W Power Amplifier with DSP
  • 1x rack mount kit
  • 1x foot pad set (4 pcs)
  • 8x 3-pin Euroblock connectors with strain relief (3.5mm)
  • 2x 4-pin Euroblock connector with screw lock (5.08mm)
  • 1x 3-pin Euroblock connector (3.5mm)
  • 1x 2-pin Euroblock connector (3.5mm)
  • 1x power cord
  • 1x user instructions


System Specification
Amplifier TypeClass D
Rated Power120W per Channel @4 or 8
240W per Channel @8 Bridge or 70/100V Hi-Z Bridge
SensitivityBalanced: +4dBu
Unbalanced: -10dBV
(0dBu=0.775Vrms, 0dBV=1Vrms)
DistortionTHD+N: <0.1%, 1kHz, 3dB before clipping
Frequency Response50~20kHz, +/-2.5dB @4, 1W, MIC/Line Input to SPK Output
Microphone Inputs
Gain Range0~+36dB
Impedance3k
Phantom power+48V
Line Inputs
Gain RangeBal: -6~+4dB
UnBal: -6~+10dB
ImpedanceBal: 5k
UnBal: 2.5k
Maximum Input Level+19dBu / Nominal: +4dBu
Line Outputs
Impedance200
Maximum output Level+10dBu / Nominal: +4dBu
Audio Outputs
ImpedanceLo-Z: 4/8
Lo-Z Bridge: 8
Hi-Z: 70V (20), 100V (40)
Headphone Outputs
Frequency Response50~20kHz, -3dB @10mW
Maximum output Level>30mW @32
Audio EffectsBuilt-In DSP (COMP, EQ, Delay, Priority, Limiter)
ProtectionOutput Shortcut
AMP Output over/under voltage
High Frequency Overload
Thermal Protect
Communication
RS-232Connector: 3-pin, 3.5mm, Terminal Block
Baud rate and protocol:
Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No
Compliance
CertificationFCC, CE, UKCA, IEC62368-1:2018
Power
Maximum Input Power Rating100-240V~, 50/60Hz, 4A with PFC
Power ConsumptionAC110V:81W:380BTU
AC220V:76.7W:360BTU
Note1/8 Max. Power Output
Environmental
Operating Temperature0~50
Humidity0-80% RH, Non-Condensing
Storage Temperature-20~60
Physical Properties
Weight5.21 kg ( 11.48 lb )
HousingMetal
Dimensions (L x W x H)43.24 x 33.97 x 4.40 cm
(17.02 x 13.37 x 1.73 in.)
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.




Product Warranty


12 Month Return To Base
 


L7: 0 | TM: 1 | LM: 0 | TY: 1 | T: 1
Newsletter
Signup here to receive our monthly newsletter.
Email Address: