Protect your home with this easy-to-install 4 zone security system utilising new '2 Wire' technology!
Many domestic alarm systems can be complicated to install and intimidating to program. Not so with this 4 zone system, which can be installed and set up by the competent home handyman!
It is perfect for home units, villas, flats, even workshops or small businesses and is simplicity itself to install. It comes complete with plugpack, two passive infra red (PIR) detectors, four reed switches for door and window protection, siren unit and main keypad control unit.
The system components are connected by basic 'figure 8' two core cable (50 metres included), and connections to the sensors, reed switches and siren unit are non-polarity sensitive. All zones are fully supervised, meaning that if the wires are cut or shorted out, the alarm will trigger. The control pad has alarm status and zone integrity indicator LEDs.
Individual zones can be set to 'bypass' or 'Home Bypass' if they are not required to be armed.
Multiple sensors may be connected to one zone, for example if two PIRs are used to cover a large area. Battery backup is provided by 8 x 1.5V AA cells to maintain system integrity in the event of mains power failure.
In the Off mode, the alarm provides a Door Chime function on Zone 1.
This DIY alarm system is incredibly simple to install, setup and use! A typical installation would only take around a half a day to complete. Perfect for home units, flats, villas or office suites!
Features
|
4 zone coverage
Very simple
wire Figure 8 wiring
Adjustable 15 to 45 second entry & exit delay
Zones may be bypassed either in Home mode or bypassed altogether
Kit includes 2 PIRs, 4 reed switches, siren unit, plugpack and 50m cable
Door chime function
Home/Out/Off modes
All zones supervised for tamper protection
Panic function
Battery backup via 8 x AA cells
Comprehensive installation instructions and system design/layout guide
Adjustable 1 to 3 minute siren sound time
PIRs use pulse count to minimise false triggering
Extra PIRs available separately
User defined PIN code
Walk test mode for checking PIR operation
|
